WetLook Enhancer
WL300 Gloss WL320 Natural
Description:
WetLook
Enhancer Clear Acrylic Lacquer represents a state-of-the-art acrylic
lacquer for beautifying and protection. It out performs virtually all
acrylic lacquers in the industry for gloss, moisture resistance,
chemical and contaminant resistance, versatility and significantly,
durability. WetLook Enhancer can be used as a self-sealing system or over RockSteel or most other sealers for added protection.
The value
and beauty of stone, tile, concrete and paver surfaces diminishes with
every bit of traffic, salts, chemicals, contaminants and grease and
grime that soils them. Water penetration and resulting freeze/thaw
cycling can ruin beautiful installations. Serveon’s WetLook Enhancer
beautifies and products letting the beauty and value endure for years.
Features and Benefits:
- Durable, exceptionally long lasting: high penetration formulation
- Incredible rich, vibrant, enhanced wet look, gloss or natural
- Outstanding strong, hard, mar and scratch resistant finish
- Forms a waterproof barrier, resistant to many chemical, salt, organic stains, oils, vehicle fluids and contaminant penetration
- Exceptional coverage
- Non-fading, strong resistance to UV rays; non-yellowing
- Maintains gloss; fast drying; low odor
- Strong bonding – exceptionally high resistance to hydrostatic pressures
Substrates and Surfaces
Use on
previously coated or uncoated, vertical or horizontal, interior or
exterior surfaces such as pavers, concrete, Mexican tile and unglazed
tiles, brick, aggregate, natural and artificial stone, masonry, stucco,
marble, terrazzo, granite, wood and many metals.
Use WetLook Enhancer WL350 for Wet Areas around pools, fountains, showers and water areas.
ALWAYS TEST
each type of surface for penetration, appearance and protective ability
before overall application. Let test area dry before inspection.
Preparation
Surface to be treated must be clean and dry. Remove dirt, oil, grease, paint, waxes, efflorescence and surface sealers.
Let new concrete cure 28 days before treating.
Ensure
fresh air entry and cross ventilation during application and drying.
Extinguish all flames, pilot lights and other potential sources of
ignition during use and until all vapors are gone. Protect
passersby, building occupants, people, vehicles, property, plants,
painted surfaces and all non masonry surfaces from product, residue,
splash, fumes and wind drift. Use polyethylene or other proven
protective material.
Application
Before applying read all sections above. Do not dilute or alter. ALWAYS TEST a small area of each surface to confirm suitability and desired results before starting overall application. Test with the same equipment that will be used in application.
- Apply a thin, even coat of WetLook Enhancer with a low-pressure sprayer not to exceed 1.0 - 1.5 dry mills per coating. Do not apply thick coating as pooling can result in depressions.
- One to two thin applications will generally result in a uniform appearance on porous surfaces. Additional coats may be desired depending on actual porosity and appearance desired. Allow 1 hour between coats or until surface is dry with pressure touch.
- Exceeding 3 mils total dry-film build up may affect overall durability.
- Let treated surfaces dry thoroughly before polishing or burnishing. Protect from rain for one hour after application.
COLOR: Transparent
GLOSS: Full
W.T./GALLON: 7.75 lbs/gal
VISCOSITY AT 770 F 80 KU
SHELF LIFE: 3 Years
SOLIDS BY WEIGHT: 33%
CHEM RESISTANCE: Very Good
FLASH POI:NT 800 F, TCC
V.O.C.: 4.4
DRY TIME @ 770 F, 55% R.H.
Touch: 10-15 Minutes
Handle: 1 Hour
Re-coat: 1 Hour
FILM THICKNESS
Wet: 2.5 - 4.0 mils
Dry: 1.0 - 1.5 mils
CLEANING OF EQUIPMENT
Xylene Flush
Surface and Air Temperature
Temperatures should be 50-900 (10-320C). Use only in well ventilated areas.
Apply as packaged. Do not dilute or alter, or use for applications other than as specified.
Coverage / Dry Time / Shelf Life
Coverage varies based on porosity and texture. Always test.
Theoretical coverage: 525 sq. ft /gal. @ 1 mil dry film thickness (dft.)
Porous Surfaces: will vary depending on porosity of the surface;
Non-Porous Surfaces: 400 – 525 sq. ft. / gallon
Dry Time: 10-15 minutes
Shelf Life: 36 Months if unopened and stored in a cool dry area. Shelf life will be shortened once opened.Cleanup
Clean tools and equipment immediately with Xylene Flush. Container may retain residues. Keep from ignition sources. Do not reuse container.
Equipment
Because of the short dry time this product is best applied with low pressure spray equipment. The product can alternately be applied with a fine natural bristle brush; care should be taken to avoid brush marks..
Maintenance
Sweep
and damp mop treated surfaces frequently to prevent abrasion from grit
and dirt. Remove heavy soiling with a surface cleaner.
Approx. Shipping Weights
1 Gallon (18.9L) 7.75 lbs
5 Gallon pail (94.5L) 38.75 lbs
CAUTION: Harmful if swallowed. Eye, skin and respiratory irritant.
If swallowed DO NOT induce vomiting. Call physician immediately. Eye contact: flush with large amounts of room temperature water for 15 minutes. Skin contact: wash thoroughly with soap and water. Irregular or stopped breathing: administer oxygen, give artificial respiration. Get medical attention immediately. Do not breath vapors or spray mist. Wear respirator approved by NIOSH.
USE WITH ADEQUATE VENTILATION - KEEP OUT OF REACH OF CHILDREN.
For limited warranty and disclaimer information contact Serveon Specialty Chemicals.
Request MSDS for additional information.
